Friday, September 24, 2021

Job and Career at Pak Army Corps of Engineers Through Technical Cadet Course

Here we guide you the details about all the processes, eligibility criteria and the selection process to Join Pakistan Army as an engineer Through Technical Cadet Course.

Here we guide you the details about all the processes, eligibility criteria and the selection process to Join Pakistan Army as an engineer Through Technical Cadet Course.

Every passionate young man loves to join Pak Army. There is a Technical Cadet Course, through which the science students can join as the engineering corps commissioned officers. Here we guide you the details about all the processes, eligibility criteria and the selection process to Join Pakistan Army as an engineer.

Join Pakistan Army as Regular Commission through Technical Cadet Course 33 now (Entry September 2021).

Last date for the online registration of application is 23rd March , 2021

ELIGIBILITY CONDITIONS

Age (As on 1st Nov, 2021): 17-21 years
Gender: Male
Marital Status: Unmarried
Minimum Height: 5’ 4” (162.5 cm).Weight: As per Body Mass Index (BMI).

Education:

  • Matric / Senior Cambridge / GCE “O Level” (English being compulsory in five subjects for  O level) both in science with minimum 60% Marks.
  • F.Sc Pre-Engineering: Minimum 65% Marks (including 20 marks for NCC)
  • A Level: Pass in Mathematics, Physics and Chemistry in Grade 1-6/ A-C.
  • Candidates who have been promoted in F.Sc Part-I (without examination) and Advance Subsidiary examination 2020 can also apply on “HOPE Certificate of 65% Marks” duly issued by Head of the Institution.
  • F.Sc Final result card/ mark sheet must be submitted within one week of announcement of Board results, otherwise, candidates will not be considered in final merit and those candidates who obtain less than 65% marks in F.Sc and less than grade A-C in Advance Level will be ineligible for subject course.
  • Candidates with F.Sc/ equivalent qualification with combination of Mathematics, Physics and Computer Studies or Computer Science can apply for Software Engineering and Computer Engineering only.

Registration can be done online from 22 Feb to 23 March 2021 on the website: www.joinpakarmy.gov.pk

Eligibility Criteria

The eligibility criteria to join Pak Army as an engineer through Technical Cadet Course is

  • The student must have the Pakistani Nationality. The domicile holders of Gilgit Baltistan and Azad Kashmir are also eligible. The person who has dual nationalities must have to surrender the other nationalities than Pakistani to Join Pak Army.
  • Only unmarried males can apply for this post.
  • The student must have the F.Sc Pre engineering degree with 65% marks, and the compulsory subjects are mathematics, physics, English.
  • ICS passed students are also allowed only at the position of software engineering.
  • Students who have passed A Level or O level can also Join Pak Army, but they need to get the certificate from the Inter Board Committee of Chairman (IBCC).
  • The students who have passed the F.Sc Part-1, and waiting for the result of Part-11, or even if they have to give the examinations of Part-11 can also apply for the post of engineering in Pak Army. They only need to get the HOPE certificate from the Head of Institute (HOD)
  • Age of the candidate must be minimum of 17 years and a maximum of 21 years.
  • Height of the candidate must be 5’4’’
  • Weight must be according to the body mass.

Selection Procedure

Written Tests

The student has to give the written test that will be based on the Multiple-Choice Questions (MCQ’s) from the subjects of Physics, English, Mathematics, Chemistry and Computer Science (For ICS Students Only). There will also some intelligence tests in which the verbal and non-verbal questions will be asked by the students. The candidates who will pass this test, have to go to the nearest AS&RC centers for the physical tests.

Physical Tests

The candidate must be fit enough and able to

  • Do 15 repetitions of Sit Ups in 2 minutes.
  • Run 1.6 Km in 8.5 minutes.
  • Do 15 repetitions of Push-Ups in 2 minutes.
  • Cross the 7’4’’ width and height of ditch with the depth of 4’.
  • Do 3 repetitions of Chin-Ups in 2 minutes.

Preliminary Medical Tests

The candidate has to pass the initial medical test from the nearest AS & RC to Join Pak Army through Technical Cadet Course.

Further Selection

  • The short-listed candidates who get selected, the management of Pak Army will give them ISSB tests call letters through websites. After passing the ISSB tests, the candidates have to clear the medical examination from the nearest CMH.
  • The GHQ will make the final selection of students on the basis of their overall performance.

Academic Training For Technical Cadet Course

After getting admission on the basis of intermediate, the students can get further academic training in different engineering fields through Technical Cadet Course. The list of the engineering fields are as follows:

  • Civil Engineering
  • Electrical (Telecommunication) Engineering
  • Computer Software Engineering
  • Electrical Engineering
  • Mechanical Engineering
  • Computer Systems Engineering
  • Mechatronics Engineering
  • Aeronautical Engineering

Civil Engineering

The duration of this course will be 4 years. It will place in Military College of Engineering Risalpur (NUST).

Electrical (Telecommunication) Engineering

The duration of this course will be 4 years. It will place in Military College of Signals Rawalpindi (NUST).

Computer Software Engineering

The duration of this course will be 4 years. It will place in Military College of Signals Rawalpindi (NUST).

Electrical Engineering

The duration of this course will be 4 years. It will place in the College of Electrical and Mechanical Engineering Rawalpindi (NUST).

Mechanical Engineering

The duration of this course will be 4 years. It will place in the College of Electrical and Mechanical Engineering Rawalpindi (NUST).

Computer Systems Engineering

The duration of this course will be 4 years. It will place in the College of Electrical and Mechanical Engineering Rawalpindi (NUST).

Mechatronics Engineering

The duration of this course will be 4 years. It will place in College of Aeronautical Engineering Risalpur (NUST).

Aeronautical Engineering

The duration of this course will be 4 years. It will place in College of Aeronautical Engineering Risalpur (NUST).

Military Training Period

After completing the 4 years course in relevant Bachelor engineering degree, the candidates will get the military training. The duration of this training will be 1 year. This training is highly necessary to polish the inner skills of the students and make them able to be the engineer in Pak Army through Technical Cadet Course. This training will place at PMA Kakul. In this training, the candidates will seek the required abilities to be engineer through Technical Cadet Course.

Designation after training

After getting the proper training from the trainers, the students will become Army Engineers in relevant fields.

Technical Cadet Course Registration Process

For the ease of the candidates, the management of Pak Army gives the opportunity to the students that they can apply through both online and offline means. As there are many students who have the willingness, but not enough resources of internet or information to apply. The details are as follows:

  • The candidates can apply online. You can apply directly by visiting the link https://www.joinpakarmy.gov.pk/
  • The candidate must have the e-mail account and all the details such as test dates, fee method and schedule will appear on the internet and his email.
  • If you have no access to the internet, then you can also apply online. For this purpose, you need to visit the nearest recruitment centers (RC) or army selection (AS) center. You must need to take all the required previous educational documents, CNIC (CNIC of father or mother if you are less than 18 years), B-form, Birth Certificate, 6 coloured attested photos by Gazette Officer and the repeaters must need to take 3 copies and original ISSB Not Recommended letter to the RC&AS.

Ineligibilities

In order to maintain the selection process easy and authentic, the management of the Army has also set the criteria for the people who are ineligible to join Pak Army. The people who cannot join the Pak army are as follows:

  • The candidate who has been screened out by the ISSB twice, cannot apply again in Pak Army.
  • The candidate who has declared medically unfit by the Appeal Medical Board cannot apply in Pak Army.
  • The candidate who has the previous record of involving in any offensive, unofficial or illegal activity by the court.
  • The candidate who has been dismissed from any government service sector can also not apply in Pak Army.

FOR FURTHER HELP & GUIDANCE WHATSAPP 0092-3324061000


Also read these articles about the career of fighter pilot at Pakistan Air Force

Join Pakistan air force as a fighter pilot

پاکستان ائر فورس میں فائٹر پائیلٹ بننے کے امیدواروں کیلئے لازمی اہلیت اور قابلیت

 

FAROOQ RASHID BUTThttp://thefoji.com
Chief Editor of Defence Times and Gulf Asia News, a defence analyst, journalist, patriotic blogger, poet and freelancer WordPress web designer. A passionate flag holder of world peace

DEFENCE ARTICLES

جے ایف - 17 کے جدید ورژن بلاک 3  میں فضا سے فضا میں مار کرنے والے...
In this March , Pakistan conducted a successful flight test of the Shaheen 1-A, a medium range...

Leave a Reply

DEFENCE NEWS

DEFENCE BLOG

OUR GULF ASIA NEWS SITE

GULF ASIA NEWS

Leave a Reply